Autotronik BA392V2

  • BA392V2 - Autotronik


AUTOTRONIK BA392 features high-precision, direct-drive ball screw and linear encoder technology in the X and Y axes, contributing to its 30 µm, 3 Sigma placement accuracy. With high-power AC servo motors allowing placement rates approaching 6400 cph.

With feeder bases on all four sides, BA392 has maximum 8mm smart type feeder capacity of 160, and 650 mm x 350 mm of payload area can be shared by PCBs and waffle trays. Placement area increases to 660 mm x 330 mm with feeder bases mounted on only the front and rear of the system and an in-line conveyor installed. BA392 with stand-alone or In/Out conveyor configurations is suitable for any In-Line or "Work Cell" manufacturing environment.

The head-mounted, upward-aimed cameras with Cognex® vision processing and programmable illumination of BA392 allow easy set-up for a wide range of SMDs, including odd form components and BGAs. Base mounted cameras with a wider optical range and diagonal split-vision image processing can even be used for alignment of large components up to 150 mm x 100 mm.

  • Number of Heads (Vision on the Fly): BA392V1:1

              BA392V2: 2

  • Placement rate (under the optimum condition):
    • BA392V1: 4500 CPH,  4000 CPH (IPC9850 Chip 1608)
    • BA392V2: 6400 CPH,  5500 CPH (IPC9850 Chip 1608)
  • Feeder capacity (8 mm) without conveyor: up to 160 Tape Feeders
  • Feeder capacity (8 mm) with conveyor: up to 96 Tape Feeders
  • IC Tray capacity:
    • up to 4 Waffle Trays
    • up to 10 Waffle tray with TH-14 Tray Handler (option)
  • Component Size:

                Handled by head camera: - Smallest: 0.6 x 0.3 mm

           - Largest: 16 x 14 mm

    Handled by fixed Bottom Vision Camera: - Smallest: 0.4 x 0.2 mm (option)

           - Largest: 150 x 100 mm (option)

  • Placement area without conveyor:
    • Max. 650 x 350 mm without Waffle Trays
    • Max. 650 x 330 mm with 1 Waffle Tray
    • Max. 455 x 330 mm with 2 Waffle Trays
  • Placement area with conveyor:
    • Max. 660 x 330 mm without Waffle Trays
    • Max. 650 x 295 mm with 1 Waffle Tray
    • Max. 650 x 175 mm with 2 Waffle Trays