Autotronik BA392V2
AUTOTRONIK BA392 features high-precision, direct-drive ball screw and linear encoder technology in the X and Y axes, contributing to its 30 µm, 3 Sigma placement accuracy. With high-power AC servo motors allowing placement rates approaching 6400 cph.
With feeder bases on all four sides, BA392 has maximum 8mm smart type feeder capacity of 160, and 650 mm x 350 mm of payload area can be shared by PCBs and waffle trays. Placement area increases to 660 mm x 330 mm with feeder bases mounted on only the front and rear of the system and an in-line conveyor installed. BA392 with stand-alone or In/Out conveyor configurations is suitable for any In-Line or "Work Cell" manufacturing environment.
The head-mounted, upward-aimed cameras with Cognex® vision processing and programmable illumination of BA392 allow easy set-up for a wide range of SMDs, including odd form components and BGAs. Base mounted cameras with a wider optical range and diagonal split-vision image processing can even be used for alignment of large components up to 150 mm x 100 mm.
- Number of Heads (Vision on the Fly): BA392V1:1
BA392V2: 2
-
Placement rate (under the optimum condition):
- BA392V1: 4500 CPH, 4000 CPH (IPC9850 Chip 1608)
- BA392V2: 6400 CPH, 5500 CPH (IPC9850 Chip 1608)
- Feeder capacity (8 mm) without conveyor: up to 160 Tape Feeders
- Feeder capacity (8 mm) with conveyor: up to 96 Tape Feeders
-
IC Tray capacity:
- up to 4 Waffle Trays
- up to 10 Waffle tray with TH-14 Tray Handler (option)
- Component Size:
Handled by head camera: - Smallest: 0.6 x 0.3 mm
- Largest: 16 x 14 mm
Handled by fixed Bottom Vision Camera: - Smallest: 0.4 x 0.2 mm (option)
- Largest: 150 x 100 mm (option)
-
Placement area without conveyor:
- Max. 650 x 350 mm without Waffle Trays
- Max. 650 x 330 mm with 1 Waffle Tray
- Max. 455 x 330 mm with 2 Waffle Trays
-
Placement area with conveyor:
- Max. 660 x 330 mm without Waffle Trays
- Max. 650 x 295 mm with 1 Waffle Tray
- Max. 650 x 175 mm with 2 Waffle Trays