Systronic CL 410 / CL 420
One chamber cleaning system for the middle up to high throughput in the field of stencil cleaning.
The cleaning system consists out of a solid stainless steel base frame and a hermetically sealed process chamber. Furthermore, it contains a cleaning tank, rotating spraying arms and a powerful convection air drying.
The SYSTRONIC CL410 is operated by PLC and guarantees the highest standard concerning the cleaning effect, reproducibility, capacity and ease of use.
The use of different stencils, squeegees or frames can be realized with a special adapter (optional) out of stainless steel.
Function of the cleaning system
The SYSTRONIC CL410 is cleaning with rotating spraying arms within a closed loop system. Supply of the spraying arms with cleaning media takes place by a powerful centrifugal pump. It pumps out – over a fine filter unit – the cleaning media out of the feeder tank. The cleaning media runs over a coarse filter unit back into the feeder tank. The ideal geometry of the cleaning chamber and the use of special plates guarantee a very low loss with respect to the cleaning media.
The drying process functions with compartment air which is absorbed, heated up and blown into the process chamber by means of a special plate for the inflow.
To absorb the arising fumes, the cleaning system shall be installed with the local extraction system.
Within the body of the cleaning system, below the process chamber, the stainless steel tank with the cleaning media is placed. Capacity: 75 liters. Included in delivery of the tanks is a coarse filter unit. Via this filter unit the cleaning media is coarsely filtered on its way back into the process chamber.
The level of the cleaning media within the tanks will be controlled via floating switch. Minimum inventories will be shown accordingly. A ground collection tray can be obtained optionally which is collecting the entire cleaning liquid.
Control of the cleaning system
The cleaning system is controlled and supervised by PLC. It contains the cleaning programs and the parameter of the CL410. The possibility to operate the actuators solely is given. All current conditions of the program or malfunction messages will be shown in the operating panel.
Electrical input: Cable 5 x 2,5mm², 2 m long - on request with CEE plug
Working voltage: 400 V, 50 Hz, 3 NPE
Power input: Max.13 A
Pre-fuse provided by customer: 16 A (all-pole switching)
Total power: 9 kW
Power circulating pump: 0,84 kW
Exhaust installation: Tube, external diameter 160mm / 500m³/h
Noise: <69 dB(A)
Dimensions / weight:
External dimensions (w x d x h): 900 x 1350 x 1750 mm
Load height: 900 mm
Internal chamber dimensions (w x d x h): 410 x 890 x 930 mm
Max. part size: 800mm x 800mm x 40 mm
Tank volume: 75 liters
Weight of the machine with tank: approx. 350kg