Atlas Copco Hoses and spiral hoses

  • Hoses and spiral hoses - Atlas Copco
  • Hoses and spiral hoses - Atlas Copco
  • Hoses and spiral hoses - Atlas Copco


Brošura

CABLAIR, super-light flexible PVC-hose

The Cablair hose is made of high-strength, high performance PVC compound. The Cablair hose weighs 30-50% less than a conventional PVC hose and is much softer and more flexible. This ensures freedom of movement for operators of pneumatic hand tools in any working environment.

Features & benefits

  • Reduce hose weight compared to conventional PVC hoses
  • Extremely soft and flexible to increase operator ease and movement
  • Silicone free and can be used in spray painting environments
  • Working temperature –15°C to +60°C
  • With a safety factor of 3 at 20°C (at the max. temp of +60°C the working pressure should be reduced by 50%)
  • The pressure drop will be 0.2 bar on a hose length of 5 m
  • Applicable standards BS EN ISO 6224:2011, BS EN ISO 5774:2008

CAIBLAIR ESD, extra flexible antistatic air hose

Cablair ESD is designed specifically for use within the computer manufacturing industry. In situations where there may be electrostatic discharge, the hose possesses properties which enable ESDS (electrostatic sensitive devices) to be handled in a protected area with a low risk level. In addition to a known demand in the computer industry, it is expected that potential exists in the electronics, radio and communication fields. The connection device must be earthed/grounded.

Features & benefits

  • Antistatic
  • Silicone free and extra flexible
  • Working temperature –15°C to +60°C
  • With a safety factor of 3 at 20°C (at the max. temp. of +60°C the working pressure should be reduced by 50%).
  • Applicable Standards BS EN ISO 6224:2011, BS EN ISO 5774:2008, BS EN ISO 8031:2009

POLUR, high resistant polyurethane hose

Polur hose is the most environmentallyfriendly solution. It has high resistance to abrasion and is oil resistant. Polur hose has a much longer lifetime than PVC hoses. Polur is ideal in tough working conditions such as workshops, factories, garages, shipyards and construction sites due to its flexibility, even at minus degrees. Polur is recommended for indoor and outdoor use.

Features & benefits

  • Oil resistant.
  • Flexible.
  • Long service life.
  • Working temperature –30ºC to +60ºC.
  • With a safety factor of 3 at 20°C (at the max. temp of +60°C 
    the working pressure should be reduced by 50%).
  • The pressure drop will be 0.2 bar on a hose length of 5 m, 
    including 2 nipples and at an inlet pressure of 7 bar.

RUBAIR, durable reinforced heavy duty rubber hose

Rubair hose is double reinforced to fulfil all general heavy duty demands and is recommended for indoor and outdoor use. Rubair hose is oil resistant.

Features & benefits

  • Durable.
  • Antistatic.
  • Grinding and welding spatter resistant.
  • Working temperature –20ºC to +80ºC.
  • With a safety factor of 5 at 20°C.
  • The pressure drop will be 0.2 bar on a hose length of 5 m, 
    including 2 nipples and at an inlet pressure of 7 bar.

RUBBER, Durable reinforced extra thick heavy duty rubber hose

The RUBBER hose withstands rough handling and is suitable for the most demanding tasks in construction, mining, shipyards, foundries etc. The inner lining is black EPDM rubber, conductive to dissipate static electricity. Reinforcement with high tensile strength made of syntetic textile yarns.


Features & benefits

  • Durable
  • Antistatic
  • Grinding and welding spatter resistant
  • Working temperature –25°C to +70°C

SPI, elastic hose for vertical and horizontal applications

SPI elastic spiral hose is ideal for air tools used at varying distances from a fixed air outlet. It is easily stretched and retracts immediately when released. When used with hand tools, its self‑storage principle
ensures that the hose is kept off the floor and out of the way of the operator. The SPI 1 and SPI 2 have ball bearing swivels fitted on the long hose side to allow 360º rotation. All spiral hoses, except the SPI4, are fitted with plastic spring guard. SPI is the ideal hose in combination with a balancer.

Features & benefits

  • Hardness: Shore A 98 +2.
  • Colour: Blue.
  • Working pressure: 8 bar at 23ºC.
  • Burst pressure: 25 bar at 23ºC.
  • Temperature range: –40ºC to +70ºC.
  • At inlet pressure 6 bar and pressure drop 0.5 bar.

SPI - US, elastic hose for vertical and horizontal applications

SPI elastic spiral hose is ideal for air tools used at varying distances from a fixed air outlet. It is easily stretched and retracts immediately when released. When used with hand tools, its self‑storage principle
ensures that the hose is kept off the floor and out of the way of the operator. The SPI 1 and SPI 2 have ball bearing swivels fitted on the long hose side to allow 360º rotation. All spiral hoses, except the SPI4, are fitted with plastic spring guard. SPI is the ideal hose in combination with a balancer.

Features & benefits

  • Hardness: Shore A 98 +2.
  • Colour: Blue.
  • Working pressure: 116 psi at 73ºF.
  • Burst pressure: 363 psi at 73ºC.
  • Temperature range: –40ºF to +158ºF.
  • At inlet pressure 87 psi and pressure drop 7 psi.

TURBO, super-light flexible rubber hose

The Turbo hose has been developed for flexible use both indoors and outdoors. The hose weighs 40-50% less than conventional rubber hoses, making it ideal for foundries, shipyards, engineering workshops and construction sites. The Turbo hose is oil resistant.

Features & benefits

  • Extremely low weight compared to standard rubber hoses
  • Soft and flexible for ease of use
  • Antistatic
  • Grinding and welding spatter resistant
  • Working temperature –30° to +70°C
  • With a safety factor of 4 at 20°C.
  • The pressure drop will be 0.2 bar on a hose length of 5 m, 
    including 2 nipples and at an inlet pressure of 7 bar.