VEGO Unloading systems

  • Unloading systems - VEGO Compact


Brochure

Magazine unloaders automatically loads a PCB's on the magazine rack using a pusher.
 

Bare Board Stacker - VEGO Compact BST 01

The Bare Board Unloader collects PCBs at the end of the production line into a single stack. The incoming PCB is positioned on the integrated conveyor. A lift unit then ads the PCB to the bottom of the stack. The maximum stack height is 200 mm and can be removed manually. The powder coated steel frame ensures process stability and excellent durability.
 

Line Unloader for one magazine - VEGO Compact BUL 01

The Line Unloader receives PCBs from upstream and transfers them via an integrate conveyor segment and an electrical pusher arm into a magazine. Once a PCB is loaded in the magazine, the magazine platform will index to the next slot. A programmable pre-warning limit will alert an operator to change the magazine manually. The powder coated steel frame ensures process stability and excellent durability. 
 

Line Unloader for two magazines - VEGO Compact BUL 03

The Line Unloader unloads PCBs from upstream and loads them into magazines. The magazine platform can accommodate up to two magazines. The integrated side shuttle distributes board to either magazine. An electrical pusher arm moves the PCBs into the magazine. Once a PCB is loaded, the magazine platform will index to the next slot. A programmable pre-warning limit will alert an operator to change the magazines manually. The powder coated steel frame ensures process stability and excellent durability.
 

Line Unloader for 3 – 5 magazines with automatic magazine change - VEGO Compact BUL 04

The Line Unloader BUL 04 is used to automatically unload PCB‘s from an SMT-production line into magazines. It is equipped with an automatic magazine change for a continuing production process. It can easily be adapted to any magazine size. 3 to 5 magazines can be loaded in a row. The machine consists of a loading and unloading conveyor for magazines, a lifting axis with a magazine platform and an inlet conveyor with electrically-driven pusher. Arriving PCB‘s are taken over onto the inlet conveyor and then into the magazine. The electricallydriven pusher pushes the PCB completely into the magazine.